Anvil-configure-host

Alteeve Wiki :: Man Pages :: Anvil-configure-host

NAME

anvil-configure-host - This program configures the host for use in an Anvil! cluster.

SYNOPSIS

anvil-configure-host <command> [options]

DESCRIPTION

This picks up a job from the database and, using the data from it, configures the host to prepare it for use in an Anvil! cluster.

OPTIONS

-?, -h, --help

Show this man page.

--log-secure

When logging, record sensitive data, like passwords.

-v, -vv, -vvv

Set the log level to 1, 2 or 3 respectively. Be aware that level 3 generates a significant amount of log data.

Commands:

--job-uuid <name>

The program is normally run as a job, with data on how to configure the host defined in the job. This switch allows the running of a specific job. If this is not set, the program will search for a job that has not yet been picked up by another process. If found, that job UUID is used automatically.

AUTHOR

Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.

REPORTING BUGS

Report bugs to users@clusterlabs.org

Sample --file Format

When using --file /path/to/file, the referenced file should have the following format;

Config file body for subnodes and DR hosts;

### Nodes/DRHosts
# If you have only one BCN but it's BCN 2 (or 3, 4...), set the BCN count to 
# the number of the real BCN and the previous BCNs will be ignored.
host_name				=	<full host name>
gateway_interface		=	<ifnX,bcnX>
gateway					=	<ip, optional>
dns						=	<csv ips>
bcn_count				=	1
bcn1_ip					=	<ip, 10.201.x.y>
bcn1_subnet_mask		=	<subnet>
bcn1_create_bridge		=	[0.1]
bcn1_link1_mac_to_set	=	<mac>
bcn1_link2_mac_to_set	=	<mac, optional>
ifn_count				=	1
ifn1_ip					=	<ip>
ifn1_subnet_mask		=	<subnet>
ifn1_create_bridge		=	[0,1]
ifn1_link1_mac_to_set	=	<mac>
ifn1_link2_mac_to_set	=	<mac, optional>
sn_count				=	0+
sn1_ip					=	10.101.x.y
sn1_subnet_mask			=	<subnet>
sn1_link1_mac_to_set	=	<mac, optional>
sn1_link2_mac_to_set	=	<mac, optional>
mn_count				=	0+
mn1_ip					=	10.199.x.y
mn1_subnet_mask			=	<subnet>
mn1_link1_mac_to_set	=	<mac, optional>
mn1_link2_mac_to_set	=	<mac, optional>

Config file for Striker dashboards

organization			=	<company>
prefix					=	<prefix>
sequence				=	1+
domain					=	<domain name>
striker_password		=	<secret>
host_name				=	<striker full domain name>
gateway_interface		=	<ifnX,bcnX>
gateway					=	<ip, optional>
dns						=	<csv ips>
# If you have only one BCN but it's BCN 2 (or 3, 4...), set the BCN count to 
# the number of the real BCN and the previous BCNs will be ignored.
ifn_count				=	1
ifn1_ip					=	<ip>
ifn1_subnet_mask		=	<subnet>
ifn1_link1_mac_to_set	=	<mac>
ifn1_link2_mac_to_set	=	<mac, optional>
bcn_count				=	1
bcn1_ip					=	<ip, 10.201.x.y>
bcn1_subnet_mask		=	<subnet>
bcn1_link1_mac_to_set	=	<mac>
bcn1_link2_mac_to_set	=	<mac, optional>

 

Any questions, feedback, advice, complaints or meanderings are welcome.
Alteeve's Niche!	Alteeve Enterprise Support	Community Support
© 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.