Alteeve Wiki :: Man Pages :: Anvil-manage-power

NAME

anvil-manage-power - This program can power off, reboot, or set a flag indicating one of these actions are required.

SYNOPSIS

anvil-manage-power <command> [options]

This program can mark a machine as needing to be powered off or rebooted, or perform those actions directly or as a job.

-?, -h, --help: Show this man page.
--log-secure: When logging, record sensitive data, like passwords.
-v, -vv, -vvv: Set the log level to 1, 2 or 3 respectively. Be aware that level 3 generates a significant amount of log data.

--no-wait: Normally, this program will not reboot a machine until the uptime is over five minutes. This is done to provide a chance for someone to log in and disable anvil-daemon in the case of a reboot loop. This switch prevents waiting for that 5 minute delay.
--poweroff, --power-off: This powers off the host.
--reboot: This reboots the host.
--reboot-needed [0,1]: This sets (1) or clears (0) the 'reboot needed' flag for the host system.
--y, --yes: If passed, requests to reboot or power off won't ask for confirmation.

Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.

Report bugs to users@clusterlabs.org

Any questions, feedback, advice, complaints or meanderings are welcome.
`Alteeve's Niche!`	`Alteeve Enterprise Support`	`Community Support`
© 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025
`legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.`