Alteeve Wiki :: Man Pages :: Striker-scan-network

NAME

striker-scan-network - This scans accessible networks to create a map of MAC addresses to IP addresses

SYNOPSIS

striker-scan-network <command> [options]

DESCRIPTION

This does a simple nmap ping sweep of the accessible networks (usually the BCN and IFN). The goal is to create a reference table of MAC addresses to IP addresses, useful for determining which IPs are in use by servers. It also allows a referencing of the MAC addresses to vendors using the OUI data. Note

This is meant to run once per day, and is run by anvil-daemon every 24 hours.

OPTIONS

-?, -h, --help: Show this man page.
--log-secure: When logging, record sensitive data, like passwords.
-v, -vv, -vvv: Set the log level to 1, 2 or 3 respectively. Be aware that level 3 generates a significant amount of log data.

Commands:

--force: This forces a scan, even if it's not been 24 hours since the last time a scan completed.
--network <ip/subnet>: This is used to scan one specific network. When this switch is used, the 24 hour run check is NOT performed, so --force is not required.

AUTHOR

Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.

REPORTING BUGS

Report bugs to users@clusterlabs.org

Any questions, feedback, advice, complaints or meanderings are welcome.
`Alteeve's Niche!`	`Enterprise Support: Alteeve Support`	`Community Support`
© Alteeve's Niche! Inc. 1997-2024		Anvil! "Intelligent Availability®" Platform
`legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.`

Striker-scan-network

Contents