Striker-scan-network

Alteeve Wiki :: Man Pages :: Striker-scan-network

NAME

striker-scan-network - This scans accessible networks to create a map of MAC addresses to IP addresses

SYNOPSIS

striker-scan-network <command> [options]

DESCRIPTION

This does a simple nmap ping sweep of the accessible networks (usually the BCN and IFN). The goal is to create a reference table of MAC addresses to IP addresses, useful for determining which IPs are in use by servers. It also allows a referencing of the MAC addresses to vendors using the OUI data. Note

This is meant to run once per day, and is run by anvil-daemon every 24 hours.

OPTIONS

-?, -h, --help Show this man page.

--log-secure

When logging, record sensitive data, like passwords.

-v, -vv, -vvv

Set the log level to 1, 2 or 3 respectively. Be aware that level 3 generates a significant amount of log data.

Commands:

--force

This forces a scan, even if it's not been 24 hours since the last time a scan completed.

--network <ip/subnet>

This is used to scan one specific network. When this switch is used, the 24 hour run check is NOT performed, so --force is not required.

AUTHOR

Written by Madison Kelly, Alteeve staff and the Anvil! project contributors.

REPORTING BUGS

Report bugs to users@clusterlabs.org

 

Any questions, feedback, advice, complaints or meanderings are welcome.
Alteeve's Niche!	Alteeve Enterprise Support	Community Support
© 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025
legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.