User:Digimer
|
Alteeve Wiki :: Digimer |
Me
Digimer <- about me.
This page below is my scratch pad.
Hardware
Compile a Kernel
RHEL 6
- PPPower Server Tutorial.
Using a kernel source RPM.
# Setup the build environment.
yum -y groupinstall "Development Tools"
yum -y install xmlto elfutils-libelf-devel zlib-devel binutils-devel
# ASCIIdoc needs to be installed from source at the moment.
wget -c http://downloads.sourceforge.net/project/asciidoc/asciidoc/8.6.3/asciidoc-8.6.3.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Fasciidoc%2Ffiles%2F&ts=1290017689&use_mirror=superb-sea2
tar -xvzf asciidoc-8.6.3.tar.gz
cd asciidoc-8.6.3
autoconf
./configure
make
make install
cd ~
# Get the src RPM
wget -c http://fedorapeople.org/~myoung/dom0/src/kernel-2.6.32.25-172.xendom0.fc12.src.rpm
# Install the source.
rpm -i kernel-2.6.32.25-172.xendom0.fc12.src.rpm
# Edit the spec file and build (remove the 'asciidoc' requirement as it was fulfilled via tarball).
cd rpmbuild/SPECS/
vim kernel.spec
rpmbuild -ba kernel.specEnable the source RPM repo
vim /etc/yum.repos.d/rhel-src.repo[rhel-src]
name=Red Hat Enterprise Linux $releasever - $basearch - Source
baseurl=ftp://ftp.redhat.com/pub/redhat/linux/enterprise/$releasever/en/os/SRPMS/
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-releaseEnable the 'RHEL Server Optional' repo and then add your system to it.
- https://rhn.redhat.com/network/software/channels/details.pxt?cid=10508
- RHN -> Software Channel Entitlements -> RHEL Server Optional
Build the Xen hypervisor
yum install transfig libidn-devel SDL-devel curl-devel libX11-devel python-devel ghostscript tetex-latex ncurses-devel gtk2-devel libaio-devel gnutls-devel openssl-devel libuuid-devel bzip2-devel xz-devel e2fsprogs-devel glibc-devel.i686 java-1.6.0-openjdk-devel libICE-devel libSM-devel gd libXpm-devel libjpeg-devel libXaw-devel imake qt-devel qt3-devel libtiff-devel cmake expat-devel dvipng ImageMagick dos2unix ruby PyXML qemu-img qemu-kvm cyrus-sasl-devel pulseaudio-libs-devel spice-server-devel
# Build dependency 'pciutils-devel'
cd ~
yumdownloader --source pciutils
rpm -ivh pciutils-3.1.4-9.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba pciutils.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/pciutils-devel-3.1.4-9.el6.x86_64.rpm
# Build dependency 'iasl'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/iasl-20100528-2.fc14.src.rpm
rpm -ivh iasl-20100528-2.fc14.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba iasl.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/iasl-*
# Build dependency 'dev86'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/dev86-0.16.17-16.fc14.src.rpm
rpm -ivh dev86-0.16.17-16.fc14.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba dev86.spec
# type 'quit' at the prompt.
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/dev86-*
# Build dependency 'perl-Text-Unidecode'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/perl-Text-Unidecode-0.04-9.fc14.src.rpm
rpm -ivh perl-Text-Unidecode-0.04-9.fc14.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba perl-Text-Unidecode.spec
cd ~
rpm -ivh rpmbuild/RPMS/noarch/perl-Text-Unidecode-0.04-9.el6.noarch.rpm
### This should be done after poppler... sort out the best order in the next go-round.
# Build dependency 'latex2html'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/latex2html-2008-4.fc13.src.rpm
rpm -ivh latex2html-2008-4.fc13.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba latex2html.spec
cd ~
rpm -ivh rpmbuild/RPMS/noarch/latex2html-2008-4.el6.noarch.rpm
# Build dependency 'gd'
cd ~
yumdownloader --source gd
rpm -ivh gd-2.0.35-10.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba gd.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/gd-devel-2.0.35-10.el6.x86_64.rpm
# Build dependency 't1lib-devel'
cd ~
yumdownloader --source t1lib
rpm -ivh t1lib-5.1.2-6.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba t1lib.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/t1lib-*
# Build dependency 'Xaw3d-devel'
cd ~
yumdownloader --source Xaw3d
rpm -ivh Xaw3d-1.5E-15.1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba Xaw3d.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/Xaw3d-*
# Build dependency 'lcms-devel'
cd ~
yumdownloader --source lcms-libs
rpm -ivh lcms-1.19-1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba lcms.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/lcms-devel-1.19-1.el6.x86_64.rpm
# Build dependency 'openjpeg-devel'
cd ~
yumdownloader --source openjpeg
rpm -ivh openjpeg-1.3-7.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba openjpeg.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/openjpeg-devel-1.3-7.el6.x86_64.rpm
### NOTE: If this step fails, log out and then back in, then try again.
# Build dependency 'poppler-data'
cd ~
yumdownloader --source poppler-data
rpm -ivh poppler-data-0.4.0-1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba poppler-data.spec
cd ~
rpm -ivh rpmbuild/RPMS/noarch/poppler-data-0.4.0-1.el6.noarch.rpm
# Build dependency 'poppler-devel'
cd ~
yumdownloader --source poppler
rpm -ivh poppler-0.12.4-3.el6_0.1.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba poppler.spec
cd ~
rpm -Uvh rpmbuild/RPMS/x86_64/poppler-*
# This may be needed if the shipped poppler was removed, taking these with them.
yum install latex2html tex-preview texlive texlive-dvips texlive-latex texlive-texmf-latex texlive-utils
# Build dependency 'teckit'
cd ~
yumdownloader --source teckit
rpm -ivh teckit-2.5.1-4.1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba teckit.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/teckit-*
# Build dependency 'sharutils'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/sharutils-4.10-1.fc14.src.rpm
rpm -ivh sharutils-4.10-1.fc14.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba sharutils.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/sharutils-4.10-1.el6.x86_64.rpm
# Build dependency 'plotutils'
cd ~
yumdownloader --source plotutils
rpm -ivh plotutils-2.5-7.1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba plotutils.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/plotutils-*
# Build dependency 'libEMF'
cd ~
yumdownloader --source libEMF
rpm -ivh libEMF-1.0.4-1.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba libEMF.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/libEMF-*
# Build dependency 'pstoedit'
cd ~
yumdownloader --source pstoedit
rpm -ivh pstoedit-3.45-10.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba pstoedit.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/pstoedit-*
### Yes, the 'kpathsea' source is 'texlive', that's not a typo.
# Build dependency 'kpathsea-devel'
cd ~
yumdownloader --source kpathsea
rpm -ivh texlive-2007-56.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba texlive.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/kpathsea-devel-2007-56.el6.x86_64.rpm
### Left off here...
yum remove texlive latex2html tex-preview texinfo-tex texlive-dvips texlive-latex texlive-texmf-latex texlive-utils
yum install tex-preview
### This also creates 'info-4.13a-8.el6.x86_64.rpm', may need to update to it...
# Build dependency 'texinfo-tex'
cd ~
yumdownloader --source texinfo
rpm -ivh texinfo-4.13a-8.el6.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba texinfo.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/texinfo-*
### Get dependent packages.
# yum install texlive-context texlive-xetex
# Build dependency 'tetex-tex4ht'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/tetex-tex4ht-1.0.2008_09_16_1413-3.fc12.src.rpm
rpm -ivh tetex-tex4ht-1.0.2008_09_16_1413-3.fc12.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba tetex-tex4ht.spec
cd ~
rpm -ivh rpmbuild/RPMS/x86_64/tetex-tex4ht-1.0.2008_09_16_1413-3.el6.x86_64.rpm
# Build dependency 'texi2html'
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Everything/source/SRPMS/texi2html-1.82-5.fc12.src.rpm
rpm -ivh texi2html-1.82-5.fc12.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba texi2html.spec
yum install cyrus-sasl-devel pulseaudio-libs-devel spice-server-devel
# Build qemu-common
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Fedora/source/SRPMS/qemu-0.13.0-0.7.rc1.fc14.src.rpm
# Build Xen
cd ~
wget -c ftp://ftp.nrc.ca/pub/systems/linux/redhat/fedora/linux/releases/14/Fedora/source/SRPMS/xen-4.0.1-6.fc14.src.rpm
rpm -ivh xen-4.0.1-6.fc14.src.rpm
cd rpmbuild/SPECS/
rpmbuild -ba xen.spec
cd ~COS Stuff
Ongoing
Sandbox
I ask people questions here.
Papers to write
I took these off the front page until I am actually ready to start them.
- 3+ Node CentOS5 Cluster + SoftSAN - How to build a 3+ Node Cluster using a home-brew iSCSI/SAN server on CentOS 5
- Setting Up Multilink PPP on Fedora 13
- Postfix + Postgrey + PostgreSQL - Multi-domain, PgSQL authenticated mail server
Code Dump
AVR from CLI
perl -MDevice::SerialPort -e 'Device::SerialPort->new("/dev/ttyUSB0")->pulse_dtr_on(1000)'; \
./hardware/tools/avrdude -Chardware/tools/avrdude.conf -q -q -pm328p -cstk500v1 -P/dev/ttyUSB0 -b57600 -D -Uflash:w:/home/pekka/sketchbook/Blink2/applet/Blink2.hex;Mux/Demux
<- Outputs ->
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
-+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- -+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-
S0 ----/ \ S0 ----/ \
S1 ---/ \ S1 ---/ \
S2 --/ \ S2 --/ \
S3 -/ \ S3 -/ \
/_______________________________________________________________________\ /_______________________________________________________________________\
| |
\-----------------------------------. .------------------------------------/
| |
-+---+-
S4 -/ \
/_________\
|
Input
S0-S5 = Source pinsResearch
MediaWiki on Debian/PostgreSQL
Misc
- Madi: Look up [1] when you get home!
- whut?
- b
- c
- d
- e
- d
Main Links
Sample Xen 2-node Cluster Network Map
MW Code Testing
h5 heading
Le text.