Na v1.1.3: Difference between revisions

Latest revision as of 04:51, 21 February 2010

Per circuit design:

Availability of parts forced a slight change from v1.1.2 to this version:

Arduino's digital pins #2-9 set to output through 330Ω resistors to 2x LTV-846 opto-isolators which switch the node's reset switches for 8 ports.
74HC540E 8-Input Inverter for the status LEDs.
1N4148 diodes prevent improper connection of the reset connectors.

Any questions, feedback, advice, complaints or meanderings are welcome.
`Alteeve's Niche!`	`Alteeve Enterprise Support`	`Community Support`
© 2025 Alteeve. Intelligent Availability® is a registered trademark of Alteeve's Niche! Inc. 1997-2025
`legal stuff: All info is provided "As-Is". Do not use anything here unless you are willing and able to take responsibility for your own actions.`

@@ Line 2: / Line 2: @@
 Per circuit design:
-[[Image:na_v1.1.3_circuit_design_b.png|480px|thumb|center|This is the schematic for a given circuit in this design. Credit's to Mark Loit.]].
+[[Image:na_v1.1.3_circuit_design_b.png|480px|thumb|center|This is the schematic for a given circuit in this design. Credit's to Mark Loit.]]
 Availability of parts forced a slight change from v1.1.2 to this version:
-* [[Arduino]]'s digital pins #2-9 set to output through 330Ω resistors to 2x [[LTV846]] opto-isolators which switch the node's reset switches for 8 ports.
+* [[Arduino]]'s digital pins #2-9 set to output through 330Ω resistors to 2x [[LTV-846]] opto-isolators which switch the node's reset switches for 8 ports.
 * [[74HC540E]] 8-Input Inverter for the status LEDs.
 * [[1N4148]] diodes prevent improper connection of the reset connectors.
 {{footer}}